Home :: Hard Parts :: BMW :: BMW Mini CVT transmission :: Stepper-Motor Mini CVT Transmission,quad drive, phase drive

Stepper-Motor Mini CVT Transmission,quad drive, phase drive

Stepper-Motor  Mini CVT Transmission,quad drive, phase drive
(0 reviews)  

Stepper motor for CVT Mini transmission
Regulates the pulley pressure for the belt to match the clamping force on the steel drive belt tension with engine torque, preventing belt slip.
Because of this Stepper motor the Transmission control unit knows the maximum torque that the belt can transfer across all possible ratio ranges. It is extremely important that the belt does not slip on the pulleys, as this would cause excessive wear.
# 7213R039

It is called also PHASE DRIVE or Quad Drive

Today, a modern CVT transmission no longer uses a cable for control. It has been replaced by a unique drive motor. In essence, it is a stepper motor, but what holds it apart from other motors is the unique way that it drives. It not only has to be very accurate about its position but it must exert a high torque load.

ZF CVT valve bodies used in the new Mini and Rover cars have this type of motor. It can also be found on other vehicles such as Nissan, Fiat etc. It is becoming more common because of its versatility and accuracy as well as being able to produce the required torque with a small motor. This is achieved by the drive or control system.
It is commonly referred to as “quad Q drive”
we have a  hand held computer with the same “quad Q drive” electronics that is required  to allow you to test these motors during rebuild. It will allow you to confirm that the motor can overcome the load spring in the valve body and that full travel is achieved.
Dont use any other tools as a quad drive system to test the stepper motor, or you will brake the motor.
SKU SKU16588
Quantity in stock 24 item(s) available
Weight 1.00 lbs
Market price: $380.00
Our price: $255.00 (euro188.62)
Quantity (24 available)
: *
: *
: *
Type the characters you see in the picture:

722.6xx Remanufactured Automatic Transmission for CLK-Class 722.370 Remanufactured Mercedes Automatic Transmission E500 722.632 Remanufactured Mercedes Automatic Transmission S430
Mercedes 722.6 Lock linkage Remanufactured Torque Converter ZF 6HP19 Remanufactured torque converter ZF 5HP24 X5
BMW 4L30E Banner Rebuild Kit BMW ZF 6HP19 remanufactured mechatronic unit OAN CVT A6 L4 2.0L/2.7L
There have been no reviews

The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.