| Scanner features |
 |
With full-feature OEM-based software, experience the difference with the AUTOBOSS Star Scanner. Comprehensive diagnosis & reading of control modules. Successful diagnostics means proper detection of all ECMs. With dealer-level capability and the widest vehicle range, the AUTOBOSS Star will put your team in the driver’s seat and your business on the road to success. View a complete listing of our vehicle coverage. |
DIAGNOSTICS
Now you can bring down the service costs associated with
fault codes. Easily read & clear vehicle specific
information – manufacturer specific codes, factory codes,
and generic fault codes on a particular electrical circuit.
Our Recommendation: Don’t forget to print it out
in real time. |
Provides a bird’s-eye view of all control modules in the
vehicle system. The Quick Test feature allows you to quickly
scan all systems in the vehicle, identify controllers with
faults and provides immediate access to those systems
without having to navigate through multiple menus. Our
Recommendation: Don’t forget to print it out in real
time. |
Live
Data
The basics of electronic diagnostics begin with fault codes
& live data. Experience high-speed response rate of 8-10
frames per second w/ real-time troubleshooting of up to 4
graphs. Diagnose signals for rich or lean conditions with
live data retrieval and viewing of modules in digital and
analog format. Our Recommendation: Don’t forget
to print it out in real time. |
Perform verification tests to validate the functionality of a
particular electrical circuit. This function will bypass
time-consuming labor to check the workmanship of electronic
components such as switches, sensors, relays, & actuators. Use
the Star Auto Scanner to actuate control
modules and see what needs replacement without removing panels
and testing without the usage of a multimeter. (e.g. cylinder
power balance test, EVAP system leak, EGR valve, solenoids,
power windows, windshield wiper activation, etc.)
|
SPECIAL FUNCTIONS
When components are replaced within a module (e.g.
injectors, switches, mass air flow sensor, cooling temp
sensor, etc.), a vehicle will run very rough.
Initialization immediately re-adapts all the values, so the
components will be recognized by the vehicle system. (e.g.
To reset the service indicator for the vehicle such as “oil
service”, “service reminder light”, “steering angle
sensor*”, etc.) |
Ability to adjust performance parameters. (e.g. idle RPM,
idle speed adjustment, ignition timing, vehicle w/
immobilizer, set fuel synchronization, throttle-body
relearn, DME Alignment, etc.) |
Coding & Programming.
Read & change coding has now become highly important for any
new retrofit control unit in the vehicle. |
OTHER FUNCTIONSSelf-learn FunctionCreate a personalized database system to record ideal conditions of the actual values in the vehicle system.Record 160 Frames of Live DataRecord a real-time data stream up to 160 frames during a drive cycle. More complicated diagnosis of an intermittent problem will require the use of this function to evaluate data stream during a controlled drive cycle. |
SEE THE DIFFERENCEContact UsTalk with your AUTOBOSS dealer for a full demonstration today.Call 1-770-888-1499 eurotrans@mindspring.com |
